- Видео 506
- Просмотров 2 296 853
AnotherMaker
США
Добавлен 15 янв 2016
This channel is the home for the all things tech. Arduinos, Raspberry Pi, Networking, PHP, Javascript, Electronics and how to make them all work together. For more coding-specific content, check out my other channel, ruclips.net/user/DevelopWithDan.
If you have a SOFTWARE project that you would like me to develop, please don't hesitate to contact me. Unfortunately, I'm not accepting offers to make hardware projects at this time. I'd love to help, but I've learned that I really want to keep hardware as a hobby.
If you have a SOFTWARE project that you would like me to develop, please don't hesitate to contact me. Unfortunately, I'm not accepting offers to make hardware projects at this time. I'd love to help, but I've learned that I really want to keep hardware as a hobby.
Tandy 2500SX Trash to Treasure
Thanks to #pcbway for sponsoring this video. Check out the card I used at www.pcbway.com/project/shareproject/The_4_XTIDE_69f4ccdd.html
BIOS Files available at github.com/mudmin/AnotherMaker/tree/master/4_dollar_xt_ide
If you're interested in getting pcbs, using this link www.pcbway.com/setinvite.aspx?inviteid=446230 for my friends over at PCBWay.com is a huge help to the channel.
BIOS Files available at github.com/mudmin/AnotherMaker/tree/master/4_dollar_xt_ide
If you're interested in getting pcbs, using this link www.pcbway.com/setinvite.aspx?inviteid=446230 for my friends over at PCBWay.com is a huge help to the channel.
Просмотров: 547
Видео
4 Raspberry Pi 5 Cases Compared - One for Every Occasion
Просмотров 1,7 тыс.21 день назад
I buy a LOT of cases for my commercial projects, and KKSB is my go to supplier. Since I just got a new Raspberry Pi 5 case, I decided to check out some of their offerings. Update: After the video was uploaded, I tested the screen with my Pi 3B and I believe there was a problem with the port on my Pi5. Raspberry Pi 5 Passive Cooling Case - amzn.to/3Wg209u Raspberry Pi 5 Hat Case - amzn.to/3xY2ys...
I built every 555 circuit in the Forrest Mims Engineer's Mini Notebook - Part 1
Просмотров 69 тыс.Месяц назад
Thanks to PCBWay.com for sponsoring this video. Interested in getting these PCBs, you can buy them at my shared project. www.pcbway.com/project/shareproject/Engineer_s_Mini_Notebook_555_Circuits_by_Forrest_M_Mims_III_PCB_1_d727fd09.html The book is available in a new format at amzn.to/4cZtYgy or you can by Mr. Mims' Memoir, Maverick Scientist: My Adventures as an Amateur Scientist at amzn.to/3W...
How to use a thermal imaging camera for computer repairs - Kaiweets KTI-W01
Просмотров 361Месяц назад
Over the past few years, thermal imaging cameras have become an important part of my diagnostic process. In this video, I'm taking a look at the Kaiweets KTI-W01 Thermal Camera and showing how I use it to diagnose computers. I'm also throwing in a few other fun uses. Discount codes! 10% off code: M6LNJSD8 $40 coupon: Apply on product page (Save 10% plus $40 in total) Date of expiry: 2024-9-30 B...
Mailbag 73
Просмотров 531Месяц назад
Using the links provided below greatly helps the channel with a small commission, but you pay the same price. Beelink Ser5 - LOVE IT! 16G/500G amzn.to/3REEdiE USB 3 Cable Mount amzn.to/3TkdXLE USB 3 Cable Mount with HDMI amzn.to/3GBZNhf HiLetgo RS232 Adapters amzn.to/3tas3nZ Anex Right Angle Screwdriver amzn.to/47NpFmj Kester 63/37 Solder amzn.to/3NkEpAY If you're interested in getting pcbs, us...
Let's build the Ultimate Cable Tester
Просмотров 1,8 тыс.2 месяца назад
Thanks to pcbway.com for sponsoring this video. If you're interested in getting pcbs, using this link www.pcbway.com/setinvite.aspx?inviteid=446230 is a huge help to the channel. Check out my Learn KiCad 8 video ruclips.net/video/SFJRHFMOhQA/видео.html
Learn KiCad 8 in 45 minutes - From idea to upload in one video
Просмотров 14 тыс.2 месяца назад
Thanks to pcbway.com for sponsoring this video. If you're interested in getting pcbs, using this link www.pcbway.com/setinvite.aspx?inviteid=446230 is a huge help to the channel. This video is designed for people who know virtually nothing about KiCad to get their feet wet with a complete project from start to finish. It's not designed to teach you every single thing you ever need to know about...
Fixing the things I don't like about the RGBtoHDMI with the RGB2HDMI Pro(totyping) Board
Просмотров 6822 месяца назад
Thanks to pcbway.com for sponsoring this video. You can get 10 of these PCBs for $5 at www.pcbway.com/project/shareproject/RGB2HDMI_Pro_The_Ultimate_Prototyping_Board_for_RGB2HDMI_6c90aa57.html This board is designed be modular so you can use as much or as little as you want My original RGBtoHDMI Video - ruclips.net/video/yZqrrq6VpKY/видео.html Get RGBtoHDMI Boards here - Get the boards here: w...
9 Pin Cable Tester - Updated and improved!
Просмотров 2,3 тыс.2 месяца назад
Thanks to PCBWay for sponsoring this video. You can get these PCBs at www.pcbway.com/project/shareproject/9_Pin_Cable_Tester_f002ae4e.html Thanks to you all for some great feedback. This project requires Arduino Nano - amzn.to/3ysygOz 18 @ 5mm LEDs - amzn.to/3WQ7TvY 9 @ 330 ohm resistors - amzn.to/4boEXQi 4 DE-9 connectors - amzn.to/3QSAUmT Optional parts: Female Headers for Nano & screen amzn....
9 Pin Cable tester
Просмотров 6052 месяца назад
Thanks to PCBWay for sponsoring this video. You can get these PCBs at www.pcbway.com/project/shareproject/9_Pin_Cable_Tester_f002ae4e.html This project requires Arduino Nano - amzn.to/3ysygOz 18 @ 5mm LEDs - amzn.to/3WQ7TvY 9 @ 330 ohm resistors - amzn.to/4boEXQi 4 DE-9 connectors - amzn.to/3QSAUmT Optional parts: Female Headers for Nano & screen amzn.to/3UMBFPF 7 Segment Display - amzn.to/4c25...
Kaiweets Screwdriver ES20 vs ES21
Просмотров 6902 месяца назад
I have been using the Kaiweets ES20 Screwdriver (Review below) for about a year. I just got my hands on the ES21, so I thought it would be fun to compare them. 5% off code: 8HNHZVGM 30% coupon: Apply on product page (Save 35% in total) Kawieets ES20 137 in 1 Electric Screwdriver amzn.to/4bMC6k1 Kaiweets ES21 70 in 1 Electric Screwdriver amzn.to/44OLhOv My ES20 Review ruclips.net/video/r7gUd8owp...
YouTube's Play All Button is gone. Let's fix that.
Просмотров 5423 месяца назад
I love listening to music when coding, but RUclips killed my Play All Button. So I wrote a little code to work around it. If you don't care about code, I've put the project up online so you can just use it at yt.spice.rocks/ Grab the code at github.com/mudmin/AnotherMaker (updated since the video) Like it? Donate over at: userspice.com/donate/ If you're interested in getting pcbs, using this li...
Build a diagnostic cartridge for the Tandy Color Computer 1, 2 or 3 - Coco
Просмотров 4153 месяца назад
#septandy Special thanks to pcbway.com for sponsoring this video. Check out the project at www.pcbway.com/project/shareproject/Tandy_Diagnostic_Cartridge_for_Color_Computer_1_2_and_3_Coco_e562ffb0.html This simple build allows you to make your own Diagnostic Cartridge for the Tandy Color Computer. It works on a CoCo 1, 2 or 3. Everything you need can be found over there. If you're interested in...
Mailbag 72
Просмотров 6815 месяцев назад
Samsung 128GB Thumb Drive amzn.to/3GyG1Do Iwiss Crimpers SN-28B amzn.to/3RAbLhz SN-01BM amzn.to/3ThnS4m BNC to RCA Adapters amzn.to/47OuX0Y SMD Button Assortment amzn.to/3RDqngp Floppy power adapter (Berg to Molex) amzn.to/3RA8m2f If you're interested in getting pcbs, using this link www.pcbway.com/setinvite.aspx?inviteid=446230 for my friends over at PCBWay.com is a huge help to the channel.
The Ultimate Guide to Replacing Cricut Rollers - Every Step. Every Detail.
Просмотров 17 тыс.5 месяцев назад
Changing the rubber rollers on your Cricut Maker or Cricut Air can be a very challenging. Nothing about this machine is "normal." I'll take you step by step through the process of disassembling the machine, changing the rollers and putting it back together. Since I've done a bunch of these, I can show you all the tips and tricks along the way. Cricut Rollers (Option 1, with clips) - amzn.to/3uS...
How to connect a Gotek to an Apple IIc, Apple IIe, or Apple IIgs
Просмотров 1,9 тыс.7 месяцев назад
How to connect a Gotek to an Apple IIc, Apple IIe, or Apple IIgs
How to test the health of your car or solar battery with the Kaiweets KVB01
Просмотров 8068 месяцев назад
How to test the health of your car or solar battery with the Kaiweets KVB01
How to Install DOS 6.22 to an SD Card - The easy way!
Просмотров 2,5 тыс.9 месяцев назад
How to Install DOS 6.22 to an SD Card - The easy way!
I got scammed by a couple of fake cards. Here's how to protect yourself.
Просмотров 1,5 тыс.9 месяцев назад
I got scammed by a couple of fake cards. Here's how to protect yourself.
How to Install Windows 95, Windows 98 or Windows ME to an SD Card the easy way
Просмотров 4,3 тыс.9 месяцев назад
How to Install Windows 95, Windows 98 or Windows ME to an SD Card the easy way
Thanks for the nice video. Would you kindly share your Arduino code with us please
Wonderful. This is by far the best detailed breakdown to replace the rolls. Helped greatly. Thank you
Waiting for Part 2.
I remember learning to solder at 9 years old. On the weekends, I would rush into my local Tandy shop (RadioShack), buy these books (still have everyone) and some Veroboard with my paper round money.
That's the IEC Serial port, not the User-port. The User-port is the wide one on the far left on the C64. The one which was usually used for Modems back in the days, or WiFi modems nowadays. I am sure you already know this and are just brain farting all over the place. But there are newer generations of C64 users out there, who are confused enough as it is with these old relics. - Yeah, and by that, I guess I mean both us and the C64s 😅
Hey There! I am hoping you (or one of your other viewers) can answer a quick question about the basic monostable circuit. What is the output voltage (pin 3) when the output is "high"? I see conflicting answers online. Some say it is 1.5V and others say it is VCC minus 1.5V (or 2V in some cases). Thanks in advance!
“This back is ribbed for someone’s pleasure, but not mine” omggggg 😭😂😂😂😂😂😂 hilarious! Now, someone needs to make the replacement rollers SNAP IN instead of slide on. I just spent well over 4 hours doing this 😂 The roller on the right side (power side) was hard to push through to pull it out, so I used my Philips screwdriver and scraped some of the plastic off and I was able to get it through (I saw someone said they sanded it lol I was too impatient to try that) ANDDD I was able to put BOTH of the circlips on with a little patience! (*pats myself on my back*) THANK YOU FOR THE TUTORIAL!
Wow what a trip down memory lane. Any time my mom wanted to go to the mall she could bring me and let me loose knowing I'd be in one of 3 places, the arcade, the hobby shop or the back of radio shack. Loved the back of radio shack. I have all these notebooks and probably built 1 circuit from all of them lol. Great idea making the pcbs, love it!
Hello, I'm not so good in fixing machine like this but my cricut machine needs a replacement on them small rollers. Can you fix it for me please! Just tell me where to send it to you.
It’s not a review it’s advertisement
I mean they didn't give me the tool and they didn't pay me and I literally use the thing multiple times a week and I think it is one of the best tools that I own. But okay
This was very helpful. thank you!
Hello, are they soundproof?
No
I followed your directions to the letter and I now have a new improved machine, I did it with 2 broken fingers in splints so anyone should be able to do it with all fingers working
Thanks for showcasing (no pun intended) this brand. I'll be checking them out for future builds.
Hey man.
Plenty of Pi's now! Good video. Great case.
Thank you so much for this. I searched many videos and this truly was the best one. The explanation of everything was clear and the video quality was great! I got my Cricut working again!
thanks for a great tutorial
Legend
Hey Dan. Fantastic tutorial. we watched tot he letter it all came back together like it should. Now to turn it on and see if it works.. thanks again Pam😀
woohoo i got my floppy disks working again👍👍👍👍👍👍👍
Thank you so much. I was able to fix my circuit maker with no problem.
Best RUclips video I have ever used. EXCELLENT!!! Thank you.
They have a detachable version for $120 now… New video?
Awesome idea, I really like the 4-in-1 PCB, this would be great for a kids' electronic lab.
I really like the five, fifty five timer ic.
Radio Shack I miss that store
Hi; I have done all the process but the disk is not bootable on a IBM PS2, it say Missing operating system. Thanks and regards
Is the $5 version a 2 layer or 4 later board. Tried to order them but failed review
Does it provide isolation?
It does not. I don't know any Variac that does... An isolation transformer is different
Got a couple of them somewhere, I need to find them :) I did make the toy 555 organ with my dad helping me
This was very helpful, thank you. The only thing I messed up was putting the cover back on. While trying to align it properly I forgot to mind the wires on the power side and nearly (thank god just nearly) messed them up.
Would be awesome if you did more of these
in the past oi had a springboard, was nice , my first experience with electronics, after that i studied electronics for years and build nice things , was good at 6502, Z80 , uses 555 a lot and also TTl 74xx series and 40xx series lots of fun.
Cheers mate, I have the Archer's series for about 35 years and now I am the lead radio tech on major LNG facility. The were essential and I still have them.
How much is it ?
To me the psy electronic experience was Operational Amplifiers, when chips with multiples of them came out, you could do anything
I built a project from the Music book for a 7th grade assignment way back in the day. Somebody stole it.
In Germany you can buy now between 350-400 euro. It´s very expensive :(
Hi, I also have that small yellow mini PCI-E debug card and I want to know if there's a way to use it for PC motherboard. I tried it with a PCI-E to mini PCI-E adapter but couldn't get the debug card to work.
very cool
Haha, I love the idea of making PCB's for them all like that! I have that book from when I was younger lol. I actually have built every circuit in that book and few of the other books. But I did end up buying nice large experiment board for doing all them (haha, still use it for Arduino and such now). Be cool have PCB with a cut out of the pages in a frame (but would have to find another book, not cutting my book up lol). Then of course use battery and have button on the front of the frame or something to run it lol. Ideas!! lol
Forrest Mims! Lots of fond memories...
IS there a way to order 1 board? PCBway seems to have a 5 board min order.
love this collection. something so right about going thru these, engineering paper and pencil... good times
I love these! I built many including my favorite the missing pulse detector circut
👏👏👏
I really miss the Radio Shack of the 70s and 80s. I used to set in the back of the store and play with their model 1 TRS-80. I had one at the house, but I still enjoyed the people standing around me watching me program. I love this video and I am a new subscriber! Extremely well explained. The terminals can also be replaced by ones that are spring loaded. Also, variable capacitors and pots could be used, but I'm sure you already though of that. Videos like these should be also children friendly for the way you explain the circuits.
Forrest M Mims.......wow. That brings back a ton of memories....Thanks.
I still have my copy. For some reason, hand drawn diagrams make learning easier. Similarly, I find that making diagrams with pencil in a large notepad is the best way to develop a design. Which a few generations are now unaware of. It engages the brain in a particular way. I just drew up a diagram of an ESP32 cluster topology a few days ago. Although it was all in my head, it is so much clearer what must be done if I make a multi-colour diagram. And it is much faster than using computer graphics.